MAC OS Firmware Installation Guide

  1. Download the ZIP firmware file. (Get it from the download below)

  1. Unzip below file and Install the drive file.

  1. Unzip below file and Install the firmware burning software.

  1. Turn on the Spider M1, and connect it with computer by below Type B USB cable.

  1. Open MKS Laser Tool V1.0.6

  1. Choose MKS ESP32 Download Tooland confirm the right COM port.

  1. Click Startto burn the firmware.

  1. Finished the burning of the firmware

  1. Plug out the USB cable and restart Spider M1.
Relevant file download address


Comment List(12)