Children’s Furniture Which Can Made by Spider X1-Children’s Slide

Do you want your baby to have rich entertainment facilities to move around indoors? Consider adding a children’s slide to your home. Yes, you don’t need to go to the market to spend more money to buy, just use Spider X1 to easily make a children’s slide!


About Spider X1, you can know more details from Kickaterter.

Equipment: Spider X1
Equipment engraving format: 800mm-1400 (extension frame*2)
Laser power: 20W
Drawing size: 800mm*800mm (carved in 4 times)
Finished product size: 500mm*1500mm (4 sheets) 1300mm*460mm*680mm
Board thickness: 8mm
Board Type: Household Plywood
Engraving parameters: 200mm/min, power 100%
Air assist: 40L/min (550W air compressor)

At the bottom of this page, you can download the GCode file that we have preset for you, and the original LightBurn file is also included in the compressed package (The version of LightBurn we are using is 1.4, you can also use “.dxf” files if you cannot open “.Ibrn2” files). The effect picture in LightBurn and the actual cutting effect is as follows:









Children’s Slide parts


Actual cutting effect

After the machine cutting is complete, follow the steps below for final processing:

1. Adhesive two layers of board with wood glue, from a single layer of 8mm to double layers of 16mm (The slope and slope side panels need to be assembled first and then adhesive)


2. Use a woodworking trimming machine, with R3.97 and R7.96 fillet knives, round the edge and remove black edges.


3. Fix with carpentry screws. An exquisite children’s slide is complete!


You can also watch our instructional video:

If you would like to know more about Spiderlasers, you can click here to visit their website.

Relevant file download address


Comment List(721)